CHINESE ENGLISH
 
13807380038 info@crackag.com
HOME Profile Products How to use News Contact
Use effect
Expansive Chemical Co., Ltd(ECC)
Add:Xiangyang Road,Loudi Hunan,P.R. China
E-mail: info@crackag.com
Tel: +86-738-8761179
Fax: +86-738-8760369
Mobile:13807380038
 
How to use Located:Home-How to use
PREPARATION
1. Demolition agent;
2. Clean and cold water;
3. Plastic or metal bucket;
4. Beater or wooden rod for mixing;
5. Safety goggles;
6. Rubber gloves;
7. Dust-proof mask (Recommended);
8. Helmet (Recommended);
9. Thermometer (Recommended)
10. The sealing material
11. Grouting pump (recommended)
MIXING MORTAR
SPLIT.AG is a kind of powder that must be thoroughly mixed with clean and cold water before use. In a ratio of 30% of the overall weight, please put the required volume of water 1.5 -1.7 liters into a container, then gradually add one bag of 5 kg of SPLIT.AG powder into water and stir all the time to obtain a smooth, lump-free slurry. If mixing has to be made by hand, rubber gloves are required to wear. Longer mixing time increases likelihood of blowout shoot.
If SPLIT.AG 2003 to be applied, inhibitor is required to add into water, while it is not necessary to traditional type.
FILLING HOLES
For vertical holes, pour SPLIT.AG mixed with water into hole directly. Tamp the mortar filled into the holes by a slightly smaller stamp stem. To very long holes, tamp the mortar section by section. For horizontal and slant holes, insert a slightly smaller plastic pipe into the hole, and then fill the expansive mortar into the pipe slowly, withdrawing the pipe from the hole simultaneously. Quickly block the hole with a cap after feeding
EXPANSIVE CHEMICAL CO., LTD Copyright 2015
Add:No:3,Xiangyang Road, Loudi, Hunan, P. R. China Email:info@crackag.com Mobile:+8613807380038
Main product:Non-Explosive Demolition Agentsoundless cracking agent Tel:+86-738-8761179  Fax:+86-738-8760369